Looking to add value and attractiveness to a home, industrial unit or office in Alfords Point?
There is one very important factor to take into account when considering refinishing a hardwood floor. That is cleanliness. Make sure the flooring is free from any debris. Tiny jagged rocks are the most dangerous and can cause severe scratching and marks.
Baseboards also need to be considered. If it’s not practical to remove them – it is possible for you to leave them in place. It is a good idea to shield them with painters’ tape if you decide to leave them in place. If you’re not cautious, a power sander can damage them.
When the floor is totally clean, your Alfords Point contractor can start to sand. They should be able to direct the sander easily over the floorboards. Ensure they are sanding parallel with all the joints in the flooring. Your contractor should be purposeful while working.
It is obvious when you have an experienced and professional contractor on the job. Adler Floor Sanding Sydney have well over 30 years’ experience in floor sanding, polishing and staining.
An experienced contractor will remove any big wood particles or debris that may have been dislodged. Sanding a wooden floor properly is not an easy task. This is why hiring a licensed and reputable floor sanding company in your local area of Alfords Point will ensure you get the best result. A local business will understand the different weather and seasonal conditions.
You’ll know when sanding is complete by the feel and look of the floors. The flooring will have a dry and smooth feel to it. Take time to crawl about and closely scrutinize the ground. Make sure you are happy with the results. An experienced contractor will likely use a technique known as feathering and will ensure they don’t over sand your flooring in any one place.
You may need to clean following this final sanding. Sweep or vacuum up all of the debris. Subsequently, use a somewhat damp cotton towel and wipe over the whole floor surface.
In conclusion, refinishing a hardwood flooring can have complications and is best completed by an expert. Don’t forget that older floorboards may have existing stains that are impossible to completely remove. Many people see these stains as providing “character” but it means you will not get a result like a new floating floor. When new boards are used, they will only have the natural knots and colourings from the timber itself.
Ask your expert Alfords Point floor sander for their recommendations for the best result for your home. Call Adler Floor Sanding on: 0419996656